| 6
EN-Rev IM/GN-BM-EU/1.93 Copyright © August, 2021. CSI Solar Co., Ltd.
www.csisolar.com
pallets touching the top of the cabinet door. For 6W-
MB-AG, the thickness of forklift teeth should be less
than 75mm and the length of the forklift teeth should
be longer than 2300mm when unloading the module
CS6W-MB-AG pallets with short side.
For unloading
CS7N-MB-AG and CS7L-MB-AG modules, the length of
the forklift teeth should be longer than 1250mm and
the width of forklift teeth should be wider than 600mm
(from middle to middle of the forklift teeth).
Unpack module pallets carefully, following the steps
shown on the pallet. Unpack, transport and store the
modules with care.
Modules must always be unpacked and installed by two
or three people. Always use both hands when handling
modules with gloves.
For vertical package, unpacking and handling should be
done with care. Visit our website or contact your
Canadian Solar representative for more detailed
unpacking requirements.
Do not
lift modules by their wires or junction box, lift
them by the frame.
Do not
allow the panels to sag or bow under their own
weight when being carried.
Stacking of modules should be limited to no more than
12 modules and frames should be aligned with one
another on the pile.
Do not
place excessive loads on the module or twist the
module.
Do not
carry modules on your head.
Do not
drop or place objects (such as tools) on the
modules.
Do not
use sharp instruments on the modules.
Do not
leave modules unsupported or unsecured.
Do not
stand, step, walk and/or jump on modules
under any circumstances. Localized heavy loads may
cause severe micro-cracks at cell level, which in turn
may compromise module reliability and void Canadian
Solar’s warranty.
Do not
change the wiring of bypass diodes.
Keep all electrical contacts clean and dry at all times.
Do not
expose the modules and its electrical contacts
to any unauthorized chemical substance (e.g. oil,
lubricant, pesticide, etc.).
PRODUCT IDENTIFICATION
Each module has three identical barcodes (one in the
laminate under the front glass, the second on the rear
side of the module and the third on the frame) that act as
a unique identifier. Each module has a unique serial
number containing 14 digits or 16 digits.
A nameplate is also affixed to the rear of each module.
This nameplate specifies the model type, as well as the
main electrical and safety characteristics of the module.
5.0 MODULE INSTALLATION
PRECAUTIONARY
MEASURES
AND
GENERAL SAFETY
