SWIFT CURRENT SPA
(7)
5) Insert the body of the top liner into the centre
of the Spa, and the Drain Hose goes through
the hole in the bottom of the Liner.
6) Pull the Spa Top Liner down and align
with Spa Base Liner. Zip the two liners
together.
TIP: Ensure top and bottom
zippers are aligned before pulling the
Top Liner down. Smooth out wrinkles in
the liner and pat out any pockets of air.
4) Ensure the 3 holes in Foam
Panel 1 are still aligned with
the holes in the Bottom Liner.
Ensure you put the cut out of
the drain (fig.a) inside to the
left of the three holes.
(fig. a)
OUTSIDE
INSIDE
4. Connecting the PCU to the Spa
Insert the three connectors into the three holes of the liner
then attach the other ends of the connectors to the PCU on
the spa as highlighted (see symbols for correct
alignment).
A) Heater port
B) Blower/Aromatherapy/Jet massage port
C) Filter port
D) Drainage outlet pipe
A
B C
D
To use aromatherapy, simply
unscrew the cap on the Aromatherapy
Port and insert canister of scented
Aromatherapy beads. Replace Cap on
Aromatherapy Port. The aromatherapy
scents will activate once the ‘JETS’
button has been pressed.
Aromatherapy feature