background image

O K A N A G A N / S A S K A T O O N / G A N D E R / M U S K O K A   S P A S

Reminder Messages

 

 

 

 

Alternates with temperature or normal display.

Appears on a regular schedule, e.g. every 90 da

ys.

Change the water in the spa on regular basis to maintain proper chemical balance and sanitary conditions.

 

 

 

 

Alternates with temperature or normal display.

Appears on a regular schedule, e.g. every 180 days.

Vinyl covers should be cleaned and conditioned for maximum life.

 

 

 

 

Alternates with temperature or normal display.

Appears on a regular schedule, e.g. every 180 days.

Wood skirting and furniture should be cleaned and conditioned per the manufacturers instructions for maximum life.

 

 

 

 

Alternates with temperature or normal display.

Appears on a regular schedule, e.g. every 365 days.
Filters should be replaced occasionally to maintain proper spa function and sanitary conditions.

 

 

 

 

Alternates with temperature or normal display.

As needed. Install new mineral cartridge.

 

 

 

 

Alternates with temperature or normal display.

Appears on a regular schedule, e.g. every 365 days.

Check your ozone and/or UV generator per your spa manufacture’s instructions.

 

 

 

 

Alternates with temperature or normal display.

Appears on a regular schedule, e.g. every 365 days.

Have a service technician do a check-up on your spa per your spa manufacturer’s instructions.

(24)

Summary of Contents for BP Series





























Reviews: