O K A N A G A N / S A S K A T O O N / G A N D E R / M U S K O K A S P A S
(27)
Warning! Qualified Technician Required for Service and Installation
Permanently wired connected Option
Basic Installation and Configuration Guidelines
Use minimum 6mil copper conductors only.
Torque field connections between 21 and 23 in lbs.
Readily accessible disconnecting means to be provided at time of installation.
Permanently connected.
Warning:
People with infectious diseases should not use a spa or hot tub.
Warning:
To avoid injury, exercise care when entering or exiting the spa or hot tub.
Warning:
Do not use a spa or hot tub immediately following strenuous exercise
Warning:
Prolonged immersion in a spa or hot tub may be injurious to your health
Warning:
Maintain water chemistry in accordance with the Manufacturers instructions.
Warning:
The equipment and controls shall be located not less than 1.5 metres horizontally from the spa or hot tub.
Warning! RCD Protection.
The Owner should test and reset the RCD on a regular basis to verify its function.
Warning! Shock Hazard!
No User Serviceable Parts.
Do not attempt service of this control system. Contact yourdealer or service organization for assistance. Follow all owner’s
manual power connection instructions. Installation must be performed by a licensed electrician and all grounding connections
must be properly installed.
Warning:
• Water temperature in excess of 40°C may be injurious to your health.
• Disconnect the electrical power before servicing.
Warning:
• Disconnect the electric power before servicing. Keep access door closed.
Inline RCD Plug (KK-10695):
• 7metre cord • Right angle 3 pin plug • In-line RCD • Shark tooth wire caps • Hot Tub Installations