Thank you for choosing the Foot and Leg Spa
from Sharper Image. Please read this Quick Start
Guide to get a general idea of how this product
works. For additional instructions and important
safety information, be sure to read the entire
user’s manual in the package.
IMPORTANT: Fill tank with water before use. Do
not attempt to use this device without water,
as this will damage the unit. Warm water is
preferred. Do not use freezing cold water as this
may damage the unit.
1. Place the unit where you want to use and lock
the unit so it doesn’t move during use.
2. Fill the tank with warm water to your desired
level (up to 6 gallons).
3. Plug the Foot and Leg Spa into an AC outlet.
(Note: Be sure your hands are dry when
plugging in the device.)
4. Press ON/OFF to start the unit.
5. Press the “Heating/water wave” button to
start the water jet. The LCD screen will
display the current water temperature.
6. Use the +Temp and – Temp buttons to adjust
the water temperature to your liking.
7. Press the “Timer” button to set a timer. It will
increase by 10 minutes cycling from 10 to 60
minutes. The display screen will show
the setting time.
8. Press “Air bubble/O3/OFF” button once to
start the air bubbles. The “Air
bubble/O3/OFF” indicator light will show
yellow as it starts. Press the button a second
time, the “Air bubble/O3/OFF” light will show
red and O3 starts working. Press this button a
third time to shut off the feature.
9. To drain the water, switch the lever to on and
open the drainage valves to allow water
to flow directly into a sewer drain.
• Before draining out water from the water
container or cleaning the appliance, you must
turn off the device and unplug the power
cord from the electric outlet.
• Always drain out water along the drain valve;
do not pour water over the control panel.
• Clean the device only with a soft cloth and mild
cleansing agent. (Never use strong abrasives,
detergents or cleaning agents.)
OPERATING INSTRUCTIONS
CLEANING AND MAINTENANCE
-1-
Item No. 200651
FOOT AND LEG SPA
Quick Start Guide