1066 Pro
11
•
If you see any of the above temperature terms exceeding the maximum level (Temp
over 35, Tmax over 85, TAvg over 68), you need to check the fan speed (as shown
in
⑥
). If the fan speed is normal, it is necessary to reduce the indoor temperature
and ensure good ventilation around the miner.
•
Vo (as shown in⑦) is the average chip voltage, which is normally 32x.
•
PS (as shown in
⑧) is the state of power supply. The meanings of items 1
-6 are as
follows:
Item 1: error code. 0 as a normal value. Other values indicate power failure or
output short circuit.
Item 2: voltage supplied to control panel. The normal value is 12xx.
Item 3: the voltage supplied to the HASH plate, normally between 1200 and
1400.
Item 4: the current from the power supply to the hash board, which is related
to the output power and voltage.
Item 5: the power output from the power supply to the hash board is 3300 for
the 1066 Pro model.
Item 6: the expected output voltage from the power supply to the hash board,
which is configured by the control board.
If the 6 parameters in the PS field of the power supply are all 0, it means that the control
panel cannot communicate with the power supply. Please check the line connection. If
the connection is correct, the power supply PSU needs to be replaced.
✓
Check whether the configuration of mine pool, miner and miner's code is correct.
Click the menu to check the configuration of ①Pool, ②Worker and ③Password. Then,
click the Save button to Save the Settings.
✓
Check your network Settings