Can-Am OUTLANDER 6x6 2021 Series Operator'S Manual Download Page 26

Page: 26 / 204

OPERATION WARNINGS

WARNING

POTENTIAL HAZARD

Attempting wheelies, jumps and other stunts.

WHAT CAN HAPPEN

Increases the chance of an accident, for the operator and the passenger
(2-UP models), including an overturn.

HOW TO AVOID THE HAZARD

Never attempt stunts, such as wheelies or jumps. Do not try to show off.

WARNING

POTENTIAL HAZARD

Failure to inspect the vehicle before operating.

Failure to properly maintain the vehicle.

WHAT CAN HAPPEN

Increases the possibility of an accident or equipment damage.

HOW TO AVOID THE HAZARD

Always inspect your vehicle prior to ride to make sure the vehicle is in safe
operating condition.

Always follow the maintenance schedule described in this Operator's
Guide.

_______

SAFETY INFORMATION

________

Summary of Contents for OUTLANDER 6x6 2021 Series













































































































































































































Search results

Summary of Contents for OUTLANDER 6x6 2021 Series

Reviews:

Related manuals for OUTLANDER 6x6 2021 Series

Brands by name

Popular brands

Can-Am OUTLANDER 6x6 2021 Series, Operator'S Manual

Search results

Summary of Contents for OUTLANDER 6x6 2021 Series

Reviews:

Related manuals for OUTLANDER 6x6 2021 Series

Brands by name

Popular brands