manualshive.com logo in svg

Can-Am OUTLANDER 6x6 2021 Series, Operator'S Manual

The Can-Am OUTLANDER 6x6 2021 Series is a powerful and versatile all-terrain vehicle designed for adventure seekers. To fully maximize its capabilities, you can download the comprehensive Operator's Manual free of charge from our website. Discover the limitless possibilities this manual offers and unleash the potential of your OUTLANDER 6x6.

Share
Download
background image

BRP LIMITED WARRANTY FOR THE EUROPEAN
ECONOMIC AREA, THE COMMONWEALTH OF THE
INDEPENDENT STATES AND TURKEY ECONOMIC
AREA: 2021 CAN-AM

®

ATV

1) SCOPE OF THE LIMITED WARRANTY

Bombardier Recreational Products Inc. ("BRP")* warrants its 2021 Can-Am ATVs
sold by distributors or dealers authorized by BRP to distribute Can-Am ATVs
("Can-Am ATV Distributor/Dealer") in member states of the European Economic
Area (which is comprised of the member states of the European Union plus
the United Kingdom, Norway, Iceland and Liechtenstein) ("EEA"), in member
states of the Commonwealth of the Independent States (including Ukraine and
Turkmenistan) ("CIS") and Turkey from defects in material or workmanship for the
period and under the conditions described below.

Non-factory installed parts and accessories are not covered under this limited war-
ranty. Please refer to the applicable parts and accessories limited warranty text.

This limited warranty will become null and void if: (1) The ATV was used for racing
or any other competitive activity, at any point, even by a previous owner; or (2)
the ATV has been altered or modified in such a way so as to adversely affect its
operation, performance or durability, or has been altered or modified to change its
intended use.

2) LIMITATIONS OF LIABILITY

TO THE EXTENT PERMITTED BY LAW, THIS WARRANTY IS EXPRESSLY
GIVEN AND ACCEPTED IN LIEU OF ANY AND ALL OTHER WARRANTIES, EX-
PRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE
EXTENT THAT THEY CANNOT BE DISCLAIMED, THE IMPLIED WARRANTIES
ARE LIMITED IN DURATION TO THE LIFE OF THE EXPRESS WARRANTY.
INCIDENTAL AND CONSEQUENTIAL DAMAGES ARE EXCLUDED FROM
COVERAGE UNDER THIS WARRANTY. SOME JURISDICTIONS DO NOT AL-
LOW FOR THE DISCLAIMERS, LIMITATIONS AND EXCLUSIONS IDENTIFIED
ABOVE, AS A RESULT, THEY MAY NOT APPLY TO YOU. THIS WARRANTY
GIVES YOU SPECIFIC RIGHTS AND YOU MAY ALSO HAVE OTHER LEGAL
RIGHTS WHICH MAY VARY FROM COUNTRY TO COUNTRY.

Neither the Can-Am ATV Distributor/Dealer nor any other person has been autho-
rized to make any affirmation, representation or warranty regarding the product,
other than those contained in this limited warranty, and if made, shall not be
enforceable against BRP.

BRP reserves the right to modify this warranty at any time, being understood that
such modification will not alter the warranty conditions applicable to the products
sold while this warranty is in effect.

3) EXCLUSIONS – ARE NOT WARRANTED

The following are not warranted under this limited warranty under any circum-
stances:

– Normal wear and tear;
– Routine maintenance items, tune ups, adjustments;

186

______________

Summary of Contents for OUTLANDER 6x6 2021 Series













































































































































































































Reviews:

No comments

Related manuals for OUTLANDER 6x6 2021 Series

Wacker Neuson 1001 Operator'S Manual preview
1001
Brand: Wacker Neuson Pages: 164
Taylor-Dunn GT-370 Operation And Maintenance Manual preview
GT-370
Brand: Taylor-Dunn Pages: 109
cascade corporation 10A Bin User Manual preview
10A Bin
Brand: cascade corporation Pages: 16
McElroy TracStar 28 Operator'S Manual preview
TracStar 28
Brand: McElroy Pages: 63
Yutrax TX158 Owner'S Manual preview
TX158
Brand: Yutrax Pages: 8
PRONAR T023 Manual preview
T023
Brand: PRONAR Pages: 99
E-Z-GO 28809-G01 Owner'S Manual And Service Manual preview
28809-G01
Brand: E-Z-GO Pages: 66
Dane Technologies QuicKART 2000 Owner'S Manual preview
QuicKART 2000
Brand: Dane Technologies Pages: 74
Ifor Williams Trailers TT85G Operator'S Manual preview
TT85G
Brand: Ifor Williams Trailers Pages: 16
Yamaha VIKING YX70MPJ Owner'S Manual preview
VIKING YX70MPJ
Brand: Yamaha Pages: 170
Land Pride Treker 4220ST Parts Manual preview
Treker 4220ST
Brand: Land Pride Pages: 96
Range Road RR600 Assembly Manual preview
RR600
Brand: Range Road Pages: 6
Textron E-Z-GO Cushman TITAN 36V HD Owner'S Manual preview
E-Z-GO Cushman TITAN 36V HD
Brand: Textron Pages: 60
Toro 07390 Workman HDX-Auto Service Manual preview
07390 Workman HDX-Auto
Brand: Toro Pages: 280
Ski-Doo ALPINE II Operator'S Manual preview
ALPINE II
Brand: Ski-Doo Pages: 7
Ski-Doo Blizzard 7500 Operator'S Manual preview
Blizzard 7500
Brand: Ski-Doo Pages: 40
Ski-Doo 1972 Elan Owner'S Manual preview
1972 Elan
Brand: Ski-Doo Pages: 38
Ski-Doo 1979 Blizzard 7500 Plus Operator'S Manual preview
1979 Blizzard 7500 Plus
Brand: Ski-Doo Pages: 40

Brands by name

Popular brands

Load more brands