Can-Am Maverick, Operator'S Manual, Page: 80 / 147

MAINTENANCE PROCEDURES
tbs2011-009-002_b
Engine Air Filter Cleaning
Clean engine air filter by tapping out
heavy dust from paper element, this
will allow dirt and dust to get out of the
paper filter.
NOTICE
It is not recommended to
blow compressed air on the paper
element; this could damage the pa-
per fibers and reduce its filtration
ability when used in dusty environ-
ments. If engine air filter is too dirty
and cannot be cleaned following the
recommended procedure, it should
be replaced.
Engine Air Post-Filter Cleaning and
Oiling
Inspect, clean, re-oil or replace (when
required) the engine air post-filter ev-
ery 250 km (155 mi) or 8 hours of oper-
ation (whichever comes first).
Engine Air Post-Filter Cleaning
1. Spray the engine air post-filter
on both sides with AIR FILTER
CLEANER (P/N 219 700 341).
219700341
AIR FILTER CLEANER (P/N 219 700 341)
2. Let stand for 3 minutes.
3. As stated on air filter cleaner (UNI)
container, rinse with plain water.
4. Dry the engine air post-filter com-
pletely using an air compressor.
NOTE: A second application may be
necessary for heavily soiled elements.
Engine Air Post-Filter Lubrication
1. Make sure engine air post-filter is
clean.
2. Spray AIR FILTER OIL (P/N 219 700
340) on the engine air post-filter pre-
viously dried.
219700340
AIR FILTER OIL (P/N 219 700 340)
3. Let stand for 3 to 5 minutes.
78
______________