Can-Am Maverick, Operator'S Manual, Page: 15 / 147

PRE-RIDE INSPECTION
ITEMS TO BE
INSPECTED
INSPECTION TO PERFORM
✔
Cargo Load: If you transport a cargo, respect
the maximum loading capacity of 90.5 kg (200 lb)
Vehicle Load: Ensure that total load on the vehicle
(including operator, passenger, cargo, tongue weight and
added accessories) does not exceed 285 kg (630 lb).
Cargo and load
If you are pulling a trailer or another equipment (if equipped
with a hitch):
– Check hitch and trailer ball condition.
– Respect the tongue capacity and towing capacity.
– Ensure trailer is properly secured to hitch.
Rear cargo rack Check if the cargo on rack is properly secured.
Chassis and
suspension
Check underneath vehicle for any debris on chassis or
suspension and clean them properly.
What to Do Before Starting the Engine (Key ON)
ITEMS TO BE
INSPECTED
INSPECTION TO PERFORM
✔
Check operation of indicator lamps in gauge (during first
few seconds of key ON).
Gauge
Check for messages in gauge.
Check cleanliness of headlights, taillights, turn signals,
position lights and reflectors.
Check operation of headlights (high and low beams), brake
lights, turn signals and position lights. Lights and reflectors
Check operation of hazard warning lights.
Check if seats are properly latched.
Check side nets for any damage. Have
the nets replaced if any damage is found.
Fasten both side nets and confirm that they latch
securely. Use the adjustment straps to tighten the nets
as required.
Seats, side nets and
seat belts
Check seat belts for any damage. Fasten seat belts and
confirm that they latch securely.
Accelerator pedal
Press on the accelerator pedal a few times to ensure it
operates freely and it returns to the rest position when
released.
________
SAFETY INFORMATION
________
13