Can-Am DS 450 EFI X mx Operator'S Manual Download | Manualshive

Page: 144 / 156

background image

WARRANTY

– Damage caused by failure to provide proper maintenance and/or storage, as de-

scribed in the Operator's Guide;

– Damage resulting from removal of parts, improper repairs, service, mainte-

nance, modifications or use of parts not manufactured or approved by BRP
or resulting from repairs done by a person that is not an authorized servicing
Can-Am distributor/dealer;

– Damage caused by abuse, abnormal use, neglect or operation of the product in

a manner inconsistent with the recommended operation described in the Oper-
ator’s Guide;

– Damage resulting from accident, submersion, fire, theft, vandalism or any act of

God;

– Operation with fuels, oils or lubricants which are not suitable for use with the

product (see the Operator’s Guide);

– Water or snow ingestion;
– Incidental or consequential damages, or damages of any kind including without

limitation towing, storage, telephone, rental, taxi, inconvenience, insurance
coverage, loan payments, loss of time, loss of income.

4) WARRANTY COVERAGE PERIOD

This warranty will be in effect from the date of delivery to the first retail consumer
or the date the product is first put into use, whichever occurs first and for a period
of:

SIX (6) CONSECUTIVE MONTHS, for private use or commercial use.

The repair or replacement of parts or the performance of service under this warran-
ty does not extend the life of this warranty beyond its original expiration date.

5) CONDITIONS TO HAVE WARRANTY COVERAGE

This warranty coverage is available

only

if

each

of the following conditions has

been fulfilled:

– The 2009 Can-Am ATV must be purchased as new and unused by its first own-

er from a Can-Am distributor/dealer authorized to distribute Can-Am ATVs in the
country in which the sale occurred (“Can-Am distributor/dealer”);

– The BRP specified pre-delivery inspection process must be completed and doc-

umented;

– The product must have undergone proper registration by an authorized Can-Am

distributor/dealer;

– The 2009 Can-Am ATV must be purchased in the country or union of countries in

which the purchaser resides;

– Routine maintenance outlined in the Operator’s Guide must be timely per-

formed in order to maintain warranty coverage. BRP reserves the right to make
warranty coverage contingent upon proof of proper maintenance.

142

______________

«
...
142
143
144
145
146
...
»

Summary of Contents for DS 450 EFI X mx





























































































































































Reviews:

No comments

Related manuals for DS 450 EFI X mx

Brand: KAYO MOTO Pages: 6

Brand: ODES UTVS Pages: 141

Brand: Aeon Pages: 126

500 MXU IRS 4X4

Brand: KYMCO Pages: 1

Brand: Suzuki Pages: 111

Brand: Ultra-tow Pages: 8

Brand: Ultra-tow Pages: 15

Brand: Traxxas Pages: 26

Brand: Yamaha Pages: 138

Expediter EX-21 2017

Brand: Columbia Pages: 32

Brand: Axley Pages: 31

Brand: Polaris Pages: 115

Brand: Polaris Pages: 40

325 MAGNUM 4X4 HDS A00CD32FA

Brand: Polaris Pages: 59

Brand: Polaris Pages: 129

ATP 330 4x4 2005

Brand: Polaris Pages: 140

Brand: Polaris Pages: 134

Brand: Polaris Pages: 125

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands