Can-Am 2007 Outlander 500 EFI Operator'S Manual Download | Manualshive

Page: 139 / 148

background image

• Incidental or consequential damages, or damages of any kind including without

limitation towing, storage, telephone, rental, taxi, inconvenience, insurance
coverage, loan payments, loss of time, loss of income.

7) LIMITATIONS OF LIABILITY

THIS WARRANTY IS EXPRESSLY GIVEN AND ACCEPTED IN LIEU OF ANY AND
ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT
LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PAR-
TICULAR PURPOSE. TO THE EXTENT THAT THEY CANNOT BE DISCLAIMED,
THE IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE LIFE OF THE
EXPRESS WARRANTY. INCIDENTAL AND CONSEQUENTIAL DAMAGES ARE
EXCLUDED FROM COVERAGE UNDER THIS WARRANTY. SOME JURISDIC-
TIONS DO NOT ALLOW FOR THE DISCLAIMERS, LIMITATIONS AND EXCLU-
SIONS IDENTIFIED ABOVE, AS A RESULT, THEY MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC RIGHTS, AND YOU MAY ALSO HAVE
OTHER LEGAL RIGHTS WHICH MAY VARY FROM COUNTRY TO COUNTRY.

Neither the distributor, any BRP dealer nor any other person has been authorized
to make any affirmation, representation or warranty regarding the product, other
than those contained in this limited warranty, and if made, shall not be enforce-
able against BRP.

BRP reserves the right to modify this warranty at any time, being understood that
such modification will not alter the warranty conditions applicable to the products
sold while this warranty is in effect.

8) TRANSFER

If the ownership of a product is transferred during the warranty coverage period,
this warranty shall also be transferred and be valid for the remaining coverage
period provided BRP or an authorized Can-Am distributor/dealer receives a proof
that the former owner agreed to the transfer of ownership, in addition to the
coordinates of the new owner.

9) CONSUMER ASSISTANCE

a)

In the event of a controversy or a dispute in connection with this limited war-
ranty, BRP suggests that you try to resolve the issue at the dealership level.
We recommend discussing the issue with the authorized dealer's service
manager or owner.

b)

If further assistance is required, the distributor's service department should
be contacted in order to resolve the matter.

c)

If the matter still remains unresolved then contact BRP by writing to us at
the address listed below.

BRP EUROPE N.V.
CAN-AM ATV
CONSUMER SERVICE CENTER
BELGIUM
TEL : +32 (0) 9 272 63 30

©

2006 Bombardier Recreational Products Inc. All rights reserved.

TM

Trademark of Bombardier Recreational Products Inc. or its affiliates.

_____________________

137

«
...
137
138
139
140
141
...
»

Summary of Contents for 2007 Outlander 500 EFI





















































































































































Reviews:

No comments

Related manuals for 2007 Outlander 500 EFI

JACOBSEN 4800 2006+

Brand: E-Z-GO Pages: 114

Brand: Club Car Pages: 20

ErgoSteer SP001V9810010

Brand: FENDT Pages: 40

Brand: Stels Pages: 139

Brand: Tao Motor Pages: 82

855 FINISHOLL Series

Brand: Landoll Pages: 10

1988 Citation LS

Brand: BOMBARDIER Pages: 52

Brand: BOMBARDIER Pages: 80

BIGBEAR YFM400NM

Brand: Yamaha Pages: 162

Brand: Yamaha Pages: 158

Brand: Swisher Pages: 4

Brand: Yamaha Pages: 166

Workman HD 07369

Brand: Toro Pages: 56

Brand: Toro Pages: 64

Brand: Schwinn Pages: 26

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands