Can-Am 2007 Outlander 500 EFI Operator'S Manual Download | Manualshive

Page: 134 / 148

background image

4) WHAT TO DO TO OBTAIN WARRANTY COVERAGE

The customer must notify a servicing Can-Am dealer within two (2) days of the
appearance of a defect, and provide it with reasonable access to the product
and reasonable opportunity to repair it. The customer must also present to the
authorized Can-Am dealer, proof of purchase of the product and must sign the
repair/work order prior to starting the repair in order to validate the warranty repair.
All parts replaced under this limited warranty become the property of BRP.

5) WHAT BRP WILL DO

BRP’s obligations under this warranty are limited to, at its sole discretion, repair-
ing parts found defective under normal use, maintenance and service, or replac-
ing such parts with new genuine Can-Am ATV parts without charge for parts and
labor, at any authorized Can-Am dealer during the warranty coverage period.

BRP reserves the right to improve or modify products from time to time without
assuming any obligation to modify products previously manufactured.

6) EXCLUSIONS - ARE NOT WARRANTED

The following are not warranted under any circumstances:
• Normal wear and tear;
• Routine maintenance items, tune ups, adjustments;
• Damage caused by failure to provide proper maintenance and/or storage, as

described in the Operator's Guide;

• Damage resulting from removal of parts, improper repairs, service, mainte-

nance, modifications or use of parts not manufactured or approved by BRP
or resulting from repairs done by a person that is not an authorized servicing
Can-Am dealer;

• Damage caused by abuse, abnormal use, neglect or operation of the product

in a manner inconsistent with the recommended operation described in the
Can-Am ATV Operator’s Guide;

• Damage resulting from accident, submersion, fire, theft, vandalism or any act

of God;

• Operation with fuels, oils or lubricants which are not suitable for use with the

product (see the Operator’s Guide);

• Water or snow ingestion;
• Incidental or consequential damages, or damages of any kind including without

limitation towing, storage, telephone, rental, taxi, inconvenience, insurance
coverage, loan payments, loss of time, loss of income.

132

_____________________

«
...
132
133
134
135
136
...
»

Summary of Contents for 2007 Outlander 500 EFI





















































































































































Reviews:

No comments

Related manuals for 2007 Outlander 500 EFI

Brand: Access Motor Pages: 22

Brand: Bosch Pages: 2

Brand: Suzuki Pages: 252

Brand: Taylor-Dunn Pages: 186

Brand: Taylor-Dunn Pages: 240

Transit Bench 900

Brand: STARKE ARVID Pages: 5

Brand: Can-Am Pages: 144

Brand: FARMA Pages: 36

Brand: BAXLEY Pages: 8

Brand: Humbaur Pages: 56

Brand: Ski-Doo Pages: 38

Brand: Baja motorsports Pages: 78

Brand: Landoll Pages: 72

Brand: Futura Pages: 24

Brand: SANMEN COUNTY YONGFU MACHINE Pages: 73

Brand: Yamaha Pages: 112

Brand: Yamaha Pages: 398

Brand: Polaris Pages: 179

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands