Camtec 3041105001CA, Manual

Page: 4 / 12

CPS-EC1000(R2) MANUAL
Camtec Power Supplies GmbH - Gewerbestrasse 30 - 76327 Pfinztal - Germany
P.4/12 (03.2022.00.0)
Phone +49(721)46596-0 - Fax +49(721)46596-77 - www.camtec-gmbh.com - info@camtec-gmbh.com
(Subject to alterations. This product is not designed to be used in applications such as life support systems wherein a failure or malfunction could result in injury or death)
Manual and Technical Details
1) Active Transient Filter 2) Rectifier 3) Inrush Current Limiter 4) Load Capacitor 5) Power Transformer 6) Storage Choke
LED: CV = constant voltage operation CC = constant current operation SD/INH = shutdown / inhibit OT = temperature failure >70°C
Technical Data Table - Analogue Interface & Voltage Current Control
Feature Technology Details and Connections Section Isolation
Potentiometer Voltage 15 turns High precision U adj 3000Vac to input & output
Potentiometer Current 15 turns High precision I adj 3000Vac to input & output
Monitoring Current 0...5Vdc/5mA AWG22 – AWG6 / 0,25 – 2,5mm² I mon 3000Vac to input
Shutdown Open Collector AWG22 – AWG6 / 0,25 – 2,5mm² SD 3000Vac to input & output
Inhibit (Interlock) Passive AWG22 – AWG6 / 0,25 – 2,5mm² Inhibit 3000Vac to input & output
Sense Compensation 1V per load line AWG22 – AWG6 / 0,25 – 2,5mm² Sense & Aux 3000Vac to input
Power Good Relay “b” contact AWG22 – AWG6 / 0,25 – 2,5mm² DC-OK 3000Vac to input & output
All potentiometers and all the inputs and the outputs of the analogue interface provide a forced isolation. It is to
ensure a protective isolation for the 300Vdc.
DC Voltage & Current adjustment range
Rated DC Voltage 24Vdc 36Vdc 48Vdc 60Vdc 72Vdc 110Vdc 150Vdc 220Vdc 300Vdc
Rated DC Current 42A 28A 21A 16,7A 13,9A 9,1A 6,7A 4,55A 3,33A
DC Voltage Setting Range 24 –
30Vdc 36 –
45Vdc 48 –
58Vdc 60 –
75Vdc 72 –
90Vdc 110 –
137,5Vdc 132 –
180Vdc 220 –
264Vdc 264 –
360Vdc
DC Current Setting Range 21 –
44,1A 14 –
29,4A 10,5 –
22A 8,0 –
17,6A 7,0 –
14,6A 4,6 –
9,6A 3,4 –
7,0A 2,3 –
4,8A 1,7 –
3,5A
The DC voltage and the current can be adjusted with a high precision 15 turn potentiometer with low
temperature fading. The factory setting is to the rated voltage & current from the table above. Due to the
tolerances of the potentiometers, the lower margin of the output voltage can be adjusted below the upper
threshold margin of the DC Power Good Relay (see p.6). To ensure a proper operation, the DC voltage setting
must stay above the upper hysteresis level of the Power Good Relay. We guarantee the above given
adjustment ranges with a tolerance of -5/0% for the lower margin and 0/+5% for the upper margin.