2
SAFETY
SAFETY
WARNING STICKERS
You will find affixed on the Conversion System’s
frame the warning stickers shown in the illustration
below. Read the stickers carefully and understand
them before using the Conversion System. They
contain important information about safety and
proper operation of the Conversion System.
CAUTION: Do not remove the warning stickers from
the frame. If a sticker is damaged, have it replaced
by an authorized Camso dealer.
WARNING - STRUT ROD
Assembly configurations
- The
Strut Rod can be assembled to the
DTS rear track system under two
possible configurations. Refer to
the
Installation Guidelines
specific
to your motorcycle to identify the
right assembly configuration.
GENERAL WARNING
User Manual
- Users must read the
User Manual before attempting to
operate a vehicle equipped with a
Conversion System.
If Conversion System is sold or in
any way transferred to a new user,
the User Manual must also be
transferred to the new user.
Moving Parts
- Hands or fingers
caught between moving parts of the
equipment present a danger to life
or limb. Turn motor off before
servicing Conversion System.
Maintenance Schedule
- Follow
the instructions contained in the
Maintenance Schedule section of
the User Manual to ensure safe and
long–lasting operation of the
Conversion System.
TENSIONER WARNING
Tensioner Bolt Warning
- If track tension
adjustment is required, the tensioner assembly bolt
must be loosened first. Re-tighten the bolt to the
recommended torque specification (35 N-m) after
completing the tension adjustment.