CPB-435CNH Case and New Holland Combines (without speed multiplier)
Camso | 04-17 | 19
27. Once the machine is lowered to the ground, move it forward or backward slowly to
uncover the remaining bolt holes.
28. Stop the machine and insert the remaining bolts on both track systems; tighten the bolts
to 220 ft-lbs (300 Nm). Coat threads of the bolt with engine oil prior to installing.
NOTE:
A 32 mm socket is provided with the fitment kit. This socket is necessary for the
socket to fit onto the head of the bolt and clear the CTS frame. Additional sockets are
available for purchase from Camso.
29. Finally, tighten all the bolts in cross sequence, moving the combine harvester
accordingly.
Mounting bolts should be torqued to 500 ft-lbs (670 Nm) for combines using
M22 bolts.
NOTE:
Mounting bolt torque should be checked regularly during use. Please reference
the SCHEDULED MAINTENANCE section of the the Operation and Maintenance Manual
(OMM) for additional information.
30. Connect Oscillation Limiters to the CTS track
frame using the clevis.
WARNING
Install original or backup protections and the ladder in conformity with the
safety rules before starting up the engine.
WARNING
The rubber track has the possibility to move transversally ¼ - ½ in (8-10
mm) each side. Verify that clearance between the track and the combine
harvester body is suitable in all pivoting positions of the track.