CBP-436(2017) Operation and Maintenance Manual-CTS Tractors
Camso | 12-17 | 33
3. Ensure the o-ring on the hub is
in place behind the cover and
tighten the six bolts holding the
cover to the hub. Torque bolts
to 132 in-lbs (11 ft-lbs) 15 Nm.
4. Remove the plug in the center
of the cover and refill each axle
hub until the oil get out of the
filling port. It’s approx. 0.25
quarts (0.24 liters) of lubricant.
Once filled, install plug.
Note:
refill the hub by using a
syringe or a pump oil can.
WARNING
Lubricants should not to be poured in the environment. Collect them in
suitable containers and deliver to licensed companies for waste
disposal in accordance with the present law in force.
Avoid any contact of the lubricant with the rubber parts. If oil is spilled
onto the track, clean oil from track surface with dry towel. Do not use
cleaning solvents or diesel fuel to clean oil from track surface as track
damage may occur.
WARNING
Use only high quality lubricants with the same characteristics shown in
“Lubricant table” section, stored in sealed containers according to
manufacturer specifications.