Receiver powered by PoE (NVR).
•
Set the dipswitch No. 1 to ON (receiver mode), set the operating channel by a table identical to
the transmitter, set DIP7 and DIP8 to ON (up)
•
Connect NVR with the network cable to the PORT 1 or LAN port in PoE power supply.
•
Connect included power supply 48VPoE to PORT 2
Note: Due to the existing PoE voltage of 48V in port 2 connection other than specified in
the instructions can cause damage to the recorder, switch or other IT equipment.
Receiver
powered
with PoE switch (NVR).
•
Set the dipswitch No. 1 to ON (receiver mode), set the operating channel by a table
identical to the transmitter, set DIP7 and DIP8 to ON (up)
•
Connect NVR equipped with PoE switch by the network cable to PORT 1. The receiver
will be powered directly from your PoE switch.
Summary of Contents for VueNet EasyLink
Page 14: ......
