Connection and start-up
It is recommended that the first start-up and configuration of the system is done at the desk at small
distances. This can save a lot of valuable time with the configuration of many different cameras.
Transmitter (IP camera):
•
Set DIPswitch No. 1 to OFF (transmitter mode), set the channel according to the
table, set the transmitter number (if there are more transmitters than one).
•
Connect the IP camera using the RJ45 cable to the PORT-2
•
Connect the supplied 48VPoE power adapter to PORT-1
•
Connect the second camera with a network cable RJ45 to the LAN port of the trans-
mitter power supply.
•
Note: IP cameras will not be powered from the transmitter and
require their own power supply.
Summary of Contents for VueNet EasyLink
Page 14: ......
