Multipoint Configuration
VueNet EasyLink
can be connected in Point-to-Multipoint configuration with up to 4
transmitters to one receiver. These settings are configured by switches 7 and 8 in each
transmitter according to the following formula:
After 90 seconds since power start equipment will make a transparent interconnection sending all IP
addresses connected to the ports of the device.
In the case of connection problems check:
•
direction of antennas and if there are no obstacles between them,
•
Change the channel number to another one,
•
Check
the
power
supply
capacity
or
replace
to
another.
Summary of Contents for VueNet EasyLink
Page 14: ......
