camry Premium CR 4498, User Manual, Page: 4 / 64

4
should be consulted in this regard.
a. Lid b. Whisk for milk frothing c. Whisk for heating milk
d. Maximum filling level mark e. Handle f. Milk jug
INSTRUCTIONS FOR USE
1.Choose the whisk for the desirable effect. Whisk for milk frothing (1b). If you want your milk frothed. Whisk for heating the milk (1c). If
you want your milk heated.
16. To avoid being splashed with milk or foam (which may be hot), always put the lid on the
milk frother before you switch it on.
g. Control button h. Power base i. Heating plate
15. NOTE: The milk frother has a heating function. Be very careful while opening the lid
and pouring milk in so as to avoid getting burnt.
17. Hold the milk frother by the handle ( 1e ). The pot housing becomes hot during
operation.
2. Filling level indicators
1. DEVICE DESCRIPTION
a. MAX level for heating milk : 3 5 0ml (2a)
b. MAX level for cold / hot milk frothing :25 0ml (2b)
The light above the function will flash 2 seconds and milk frother will start working automatically.
CLEANING AND MAINTENANCE
IMPORTANT: Do not put milk frother base into water.
NOTE: Do not exceed the MAX line inside the jug.
3. Put the lid (1a) on the jug and place the jug on the power base (1h).
Insert the power plug into an electrical outlet. The mode icons will
light up for one second.
- four times - if you want your milk to keep cold and just froth it (with whisk 1b) for iced coffee or flavoured milk.
NOTE: DO NOT TOUCH THE HEATING PLATE (1i).
5.You can also clean the frother by pouring water into it and running for one cycle (this prevents the whisk from blocking by milk
sediments accumulating on the agitator shaft seal).
TECHNICAL DATA:
- once - if you want to heat and froth your milk (with whisk 1b) to get the cappucino froth
1.Before washing the appliance, make sure it cooled down and is disconnected from the power socket.
NOTE: For best results use cold, fresh milk. Non-dairy milk doesn't froth as well as dairy milk. For best effect use “barista” type plant
based milk.
6. To turn off the appliance before the end of the cycle, press the control button (1g) during work.
NOTE: The milk jug is dishwasher safe but should not be washed in higher temperatures than 70°C/ 158°F.
4 .The device should be washed after each use.
Power supply: 220-240V ~50/60Hz
4. Touch control button (1g) and choose desired program: cappuccino, latte, hot chocolate, cold.
- three times - if you want to heat and froth your milk (with whisk 1b) to prepare hot chocolate. Or if you want only to heat your milk (with
whisk 1c).
3 .Clean jug with a soft cloth and washing-up liquid.
5. The appliance will run until a high temperature of milk is reached. Once its done it will stop automatically and beep three times.
2. Pour in a portion of milk (preferably 3.2% fat). The milk should cover the whisk (1b or 1c), and reach marked minimum level but not
exceed the maximum level mark (1d). Maximum level for milk heating is 3
5 0ml (2a) and for milk frothing is 2 5 0ml (2b).
NOTE: AFTER OPERATING BOTTOM OF THE JUG IS HOT. DO NOT TOUCH IT!
NOTE: Milk heats to approximately 68 - 78 °C. This temperature ensures the best flavor of the coffee.
- twice - if you want to heat and froth your milk (with whisk 1b) to get the latte froth
2.Always remove the jug from the power base before cleaning.
Power: 5 00W
Maximum power: 1000W
NOTE: DO NOT take off the jug from the heating plate when its operating.
Capacity: frothed: 25 0ml / heated: 3 5 0ml