SAFETY INFORMATION
Positioning:
Do not attempt to lift the product alone, due to the weight of the product movement
must be performed by at least two people. When moving the product use the two handles
on the side of the machine
install the machine in accordance with the detailed instructions provided separately.
Ensure that the compartment to house the appliance is suitably stable and sturdy
and is not inclined more than 2 degrees.
Position the drain tube as set forth in the installation instruction sheet. Make
especially sure that it is not bent, that there are no contacts with hot surfaces, that the
height above the floor is correct and that the diameter of the attachment hole is at least 4
cm. If you use the end fitting, make sure it is secured to the sink and/or tie it with a cord.
The end must not be immerged in the water to prevent the backflow of water into the tub
(see figure (see figure)
Drain connection
Make sure that the connection to the plumbing system is easily accessible
To avoid the risk of clogging or damage, if the pipes are new or have not been used
for a lengthy period, before making plumbing connections make sure the water is clear and
free of impurities to prevent damage to the appliance or to dishes.
For plumbing connections use the provided pipe (new). Do not use previously
existing ones. Before connecting to the machine, make sure the water is clear and free of
impurities (generally rust) which might damage your machine
Connection to water outlets
5
