Camplux TE11, Use & Care Manual

Page: 13 / 44

Set a lower temperature
Turn the valve to increase the inlet
water flow
Set a higher temperature
Turn the valve to reduce the inlet
water flow
Clean strainer and shower
Reduce the temperature
Turn up the water flow
Please contact with your local
dealer
Reduce the inlet water flow
Too high temperature set
Water flow too little
Low temperature set
Water flow too much
Inlet strainer or shower
clogged
Outlet temp is over 153°F/ 67 °C
Temperature sensor failure
Inlet water flow is too high
4. Water too hot
5. Water too cold
6. Outlet gets water
smaller and smaller
7. LED displays E1
8. LED displays E3
9. Display overload
Open valve to get water
Open valve to get pressure
Change key or PCB
No water out from shower
Water pressure too low
Key or PCB damaged
3. Functional keys
not working
Note: Problem No.7 and No.8 should only be performed by qualified electrician. The person
who initially installed the unit is the best one to contact for help.
NORMAL MAINTENANCE
Note: Do not attempt to repair this water heater by yourself. Call a service person for assistance.
Always turn off all power supply to the unit. Turn off all circuit breakers that supplying power to the
appliance. Please note some units are connected with multiple circuit breakers. TURN OFF ALL
WATER SUPPLY AND ALL POWER SUPPLY.
This unit does not require any regular maintenance. However, to ensure consistent water flow, it is
recommended to follow the following procedures.
1. Periodically remove scale and dirt that may build up at the aerator of the faucet or in the shower
head.
2. There is a built in filter screen at inlet connection which should be cleaned from time to time.
Please turn off the water flow before doing this.
www.camplux.com
12
Visit Us: Camplux.com
support@camplux.com
3330-A Marathon Ct Charleston, SC 29418
(844) 538-7475