Campersat AutoSeek Autoskew
13
H4441 Build 4441 August 2008
To change satellites from C1 to eg. Pas 8(Select TV) please read the following:
•
Press menu and go to Oyster Digital and press OK.
•
Go to edit settings and press OK.
•
Go to search satellite and press arrow across on your remote control intil you
see Intelsat 8(PAS 8) and then press OK.
•
Another list will display, select Intelsat 8, and press OK.
•
Go up to Autosearch, then press OK.
•
The system will then search for the selected satellite.
To change from Intelsat 8 to C1, follow the above directions but select C1 rather than
Intelsat 8.
Please note: When using C1 satellite, and viewing Free To Air channels, you must
leave the Oyster system on channel 4. The signal will be then be delivered to your
receiver.
LNB Settings When Using Select TV
1. When your system has found Intelsat 8(Pas 8) Turn on your Select TV Receiver
allow to start up.
2. Using your Select TV remote, press Menu.
•
Select Antenna settings
•
Select LNB Type
•
Select LNB Frequency 1
•
Type in 10,700 on your remote keypad using the number on your remote
•
Press exit, and then exit once again
3. You will then be prompted to save settings. Press OK to confirm.
4. Next press exit to exit the menu. Select TV will now be operational.
