Campbell RavenXT G2212-C, Instruction Manual, Page: 33 / 54

Appendix A. AceManager Setup
without Template File
AceManager is used to program settings in the RavenXT modems to make the
modems compatible with CSI dataloggers. Sierra Wireless CDMA and
GPRS/EDGE template files to send the modems are available on the CSI
website (
www.campbellsci.com/downloads ). The procedure for sending the
template files is described in Section 5, Using AceManager to Program the
Modem .
When the template files are not available, AceManager can be used to change
the settings described below.
For a direct connection on a COM port use PPP.
Make a note of the Device port (*DPORT). The default is 12345 and we use
3001 in our template. Any valid port can be used. This is the port number
used in LoggerNet to get to the datalogger.
A-1