1. Introduction
The MetSENS-series compact weather sensors monitor different combinations of common
meteorological parameters to international standards—all in a single, integrated instrument. A
variety of output options ensure plug and play operability in a wide variety of applications.
2. Precautions
l
READ AND UNDERSTAND the
section at the back of this manual.
l
Care should be taken when opening the shipping package to not damage or cut the cable
jacket. If damage to the cable is suspected, consult with a Campbell Scientific support and
implementation engineer.
l
Opening the unit or breaking the security seal will void the warranty and the calibration.
l
The sensor is a precision instrument. Please handle it with care.
l
When installing the unit, handle with lint free gloves and degrease the unit to reduce the
build-up of deposits.
3. Initial inspection
Upon receipt of the MetSENS-series sensor, inspect the packaging and contents for damage. File
damage claims with the shipping company.
Each MetSENS-series sensor is shipped pre-configured, with a test report and cable.
Configuration and cable type depends on the communication mode chosen: SDI-12, Modbus RS-
485, or RS-232. The cable length can be 5 m (17 ft), 15 m (50 ft), 46 m (150 ft), or user specified.
Replacement cables are as follows:
l
METSENSCBL1 SDI-12 Replacement Cable
l
METSENSCBL2 RS-485 Replacement Cable
l
METSENSCBL3 RS-232 Replacement Cable
MetSENS-Series Compact Weather Sensors
1