o
Telus
Dynamic Connect (Public)
Static Connect (Public)
o
Rogers – Public Dynamic IP subscription
o
Data plan type: “Flex Data for Tablet” – (all 3 Service
Providers)
It is recommended to discuss the account types available and their
requirements with your intended Service Provider before
purchasing the IPn3Gb Cellular Modem.
What you receive from the Service Provider:
x
SIM card (standard size)
x
10-digit Cellular Telephone Number
x
Access Point Name (APN)
x
User name
x
Network Password for use with User Name (optional based on
configuration)
5.1
Base Station Requirements for IPn3Gb Cellular Modem
A PC running Campbell Scientific’s Loggernet or PC400 software, with access
to the Internet.
5.2
Datalogger Site Equipment
x
IPn3Gb Cellular Modem with power cable (included).
x
Antenna - The antenna chosen for use in your application must be
connected to the “Antenna” connector of the IPn3Gb Cellular Modem. Do
not connect the antenna to the Rx Diversity connector.
x
Datalogger – CR1000, CR3000, CR800 series, CR200X series.
x
L18663 Null Modem Cable – required if connecting the modem to the RS-
232 port of a CR1000, CR3000, CR800 series, or CR200X series
dataloggers
x
L28900 Ethernet Cable – connect the modem Ethernet port to a PC or
other Ethernet device. Commonly used to configure the modem. The
IPn3Gb Ethernet port is auto-sensing so a cross-over cable can also be
used. (optional)
x
C2809 USB Cable – connect the modem USB port to a PC in order to
configure the modem. (optional)
NOTE
4