3.
Connect the power cable between the Vin & GND terminals on the
modem and the power source.
4.
Connect the USB (C2809), Ethernet (L28900) or equivalent Ethernet cable
between the modem and the PC to start the configuration process.
5.3.3 Connecting for Configuration
Be sure to allow the modem to warm up before trying to connect.
A minimum warm up time of 2 minutes is recommended.
In order to configure the modem you will need to connect via USB or Ethernet
using a web browser (
e.g.
Internet Explorer).
5.3.3.1 USB
Requires the use of related USB
x
Enter the following IP address into the navigation bar of the web browser:
192.168.111.1
x
Enter User ID and Password
admin/admin
5.3.3.2 Ethernet
x
Enter the following IP address into the navigation bar of the web browser:
192.168.0.1
x
Enter User ID and Password
admin/admin
Note
Note
6