FIGURE C-3. Hinged Stack Mounting Kit components
FIGURE C-4. Hinged Stack Mounting Kit
C.2 Hinged enclosure stack mounting kit
installation
1. Determine the spacing needed between the two legs and which holes on the backplate will
be used to mount the stack mounting kit.
2. Secure the legs to the backplate using screws and grommets. Mount the stack mounting kit
so the hinge is positioned on the left (or top, if mounting the kit vertically). If a component
is to be mounted under another and shares the same mounting holes as the leg, mount the
pieces in the following order: backplate, grommet, leg, component, screw.
3. Install the lower component onto the backplate using screws and grommets. Connect any
required wiring.
4. Insert grommets into the hinge plate where required for the component to be mounted on
the hinge plate.
5. Place the top component into position on the hinge plate, and then secure it with screws.
Enclosures
39
