Detailed Main Menu Command Information
A-2
4.
[.hl]
The [.hl] command is used to obtain a graphical representation of the current
histogram results. This information would normally be used for diagnostics or
by a user who requires an analysis of the gamma radiation spectrum. The
command produces a log scale graph as follows:
5.
[.hr]
The [.hr] command is used to verify radiation counts in Manual mode. The
[.hr] command would normally be used in the process of qualifying a site for
adequate background radiation counts and is used in conjunction with the [.a]
command (see the [.a] command for details).
Please note that the [.hr] command can take several minutes to complete.
When the command is entered the [.hr] command will immediately report the
duration of the current manual count time as follows:
-Elapsed time,current histo : 00:03:59 (HH:MM:SS)
Wait for the calculation to complete.
There will then be a pause that can take several minutes. After the pause a
histogram will be output followed by the radiation count summary. The
summary will report 3 lines; the duration of the counting, the position of the
40
K peak and its processed count value, the position of the
208
Tl peak and its
processed count value. The output format after the histogram is as follows:
-Elapsed time,current histo : 00:03:59
Pos K = 240.4; Pos Tl = 427.5;
Cnt K = 003679.8; Cnt Tl = 000088.3;
Summary of Contents for CS725
