Campbell CCFC Field Camera, Instruction Manual

Page: 25 / 127

CCFC Field Camera
11
when the camera is not in use, the power cable must be left
connected, if the camera is to be left installed.
When connecting the cable to the camera, the notch positions
must always line up.
7.2 Setup Button/Status LED
The Setup Button is located behind a protective cap on the
camera. The Setup Button also contains an integrated Status LED
for user feedback.
7.2.1 Status LED
The Status LED located in the centre of the Setup Button provides
some useful diagnostic information about the camera. Table 7-1
describes the Status LED behaviour. This assumes the power
supply is between 9 - 30 Vdc.