CC5MPX & CC5MPX-Z Digital Network Camera
48
The Capture Interval is the time between capture events once the Start
Minutes value is reached. For hourly pictures a value of 60 can be entered.
If a value of 0 is entered, (not recommended) the Image Interval time will
apply to still images and video of the specified duration will be captured
repeatedly.
The following table summarizes all the parameters associated with the Self
Timed Capture.
Table 7-7 Self Time Capture Variables
Variable Allowable
Values
Description
Self Timed Capture
Enable
• Enable
• Disable
Enables or Disables the Self Timed Capture Trigger
Start Minutes
0 to 1439
Start time in minutes relative to midnight
Stop Minutes
0 to 1439
Start time in minutes relative to midnight
Capture Interval
0 to 1439
Interval between capture times in minutes. To initiate a capture
interval every 5 minutes set the variable to 5.
Still Image Capture
• Yes
• No
Select Yes to include still image captures
Number of Images
1 to 60
Determines how many still images will be taken when the capture
time is reached.
Image Interval
1 to 60
If the Number of Images (above parameter) is greater than 1. Then
this parameter is the time spacing between images.
Capture To Memory
Card
• CARD
• No
Selecting CARD will enable the still images taken to be stored to
the memory card.
Maximum Memory
Size
0 to 65535
This is the allowable space on the memory card that will be
reserved for Still Images taken by this Self Timed Capture. The
value is in Megabytes. A value of 1000 will reserve 1000 Mbytes.
A value of 0 will have the camera automatically allocate the
memory.
Management Type
Options
• Fill and Stop
• Ring Memory
There are 2 methods of managing files on the memory card:
• Fill and Stop will stop recording additional images once the
memory card is full or the allocated memory size is reached.
• Ring Memory management will start deleting the oldest files
once the memory card is full or the allocated memory size is
reached.
Still Image Settings • Settings #1
• Settings #2
Still Images for this Self Timed Capture can use 1 of 2 settings.
Settings #1 and Settings #2 can be setup with various banner,
resolution and compression values. Refer to Section 7.8.
Main Folder Name
Read Only Field
This is a read only field. The Name of the Main Folder where the
still image files will be stored (SelfTimed1Still).
