![background image](http://html1.mh-extra.com/html/campbell-hausfeld/xt051000/xt051000_operating-instructions-manual_3846617004.webp)
2
BEST PRACTICES
u
For best output, maintain pressure at the tool of 90 PSI.
u
The longer your air hose the greater the pressure drop from compressor to tool.
If you are using a hose longer than 50 feet, consider upgrading to a 1/2 inch ID air
hose to ensure proper tool pressure.
u
Failure to lubricate and maintain your air tools properly will dramatically shorten
their life. Use oil every time you use your air tool to lubricate, clean and inhibit rust
in one step. Campbell Hausfeld sells air tool oil under part number ST1270.
SPECIFICATIONS
XT051000
Maximum PSI
90
CFM under load 100% duty
1.9 CFM @ 90 PSI
CFM no load 100% duty
3.4 CFM @ 90 PSI
SCFM under load 100% duty
14.3 SCFM @ 90 PSI
SCFM no load 100% duty
24.6 SCFM @ 90 PSI
Air Compressor Recommendation
4 gallon
Max Torque
75 Ft. Lbs.
Working Torque
0 - 50 Ft. Lbs.
Rated RPM (free speed)
320
Impact Speed (IPM)
1,600
Speed Control
Trigger
Direction Change
Reverse
1
Forward
1
Gear Type
Pin Clutch
Bolt Capacity
3/8 inch
Air Inlet
1/4 inch NPT (F)
Minimum Hose Size
3/8 inch
Anvil
3/8 inch
Housing Material
Composite
Tool Weight
2.8 Lbs.
Tool Length
11-1/4 inch
Tool Width
2-1/4 inch
Tool Height
1-7/8 inch