Campbell Hausfeld LIGHT DUTY CART Airless Paint Sprayers, Assembly Instructions And Parts List

Page: 2 / 12

2
Assembly Instructions and Parts List
Assembly (Continued)
9. Place bucket hook over top of frame
with the hook to the outside of the
frame.
10. Line up the two holes in the bucket
hook with the two holes in the top
of the frame (See Figure 7).
If using a power
tool to drive the
NOTICE
1 Stand handle AL172304AV 1
2 Handle bolt AL152201AV 2
3 Hose rack AL066101AV 1
4 Handle (Includes hose rack) AL066021SV 1
5 Axle (Includes bolts) AL066030SV 1
6 Washer ST090200AV 2
7 Wheel WA002601AV 2
8 Pal nut AL066300AV 2
9 Nut AL060000AV 2
10 By-Pass tube and clamp AL174302SV 1
11 Suction tube assembly AL138404SV 1
(Includes tube and connectors)
12 Suction bell assy. (Includes filter) AL111000SV 1
13 Bucket hook AL136200AD 1
14 Screws HP007117AV 4
15 Handle (Includes hose rack) AL139200SV 1
16 Washer AL136000AV 4
17 Cotter pin AL149700AV 2
18 Wheel WA002602AV 2
19 Faceplate screws HP007118AV 1
20 Piston kit AL131502SV 1
21 Diaphragm kit (Check valve
kit included)
See chart 1
22 Hose adapter (Includes washer) AL104700SV 1
23 Outlet valve assembly AL129600SV 1
24 Pump block (Incl. all washers) AL042413SV 1
25 Inlet valve assembly AL165400SV 1
26 Pushbutton seal AL162000AV 1
27 Outlet push/pull assy. AL159500SV 1
28 Prime/Spray valve assembly AL132100SV 1
29 Check valve kit AL163200SV 1
30 Pressure valve assembly AL131401SV 1
31 Housing kit
(Includes 20,29, & 30)
See chart 1
32 Eccentric and bearing kit See chart 1
33 Faceplate gasket AL013702AV 1
34 Cast faceplate AL045102AV 1
35 Valve stem nut (3 pack) AL083300AV 1
36 Gun swivel AL081300AV 1
37 Gun filter (100 mesh) (2pack) AL086101AJ 1
38 Trigger pin AL085800AV 1
39 Ball, valve & plunger assy AL083800AV 1
40 Trigger AL083900AV 1
41 Trigger guard AL083700AV 1
42 Gun diffuser AL083000AV 1
43 Pro gun (with .015 tip) AL3104 1
44 Semi pro gun (Includes .015 tip)
(Metal)
AL2140 1
(Plastic) AL2130 1
45 Retaining ring ST002500AV 2
46 Trigger AL023600AD 1
47 Handle with screw AL023703SV 1
48
■
Long filter housing AL139002SV 1
49 Safety lock AL117800SV 1
50 Gun valve AL138700SV 1
51 Trigger pin AL024100AD 1
52
■
Gun filter (100 mesh) (2 pk.) AL086101AJ 1
53
■
Hose adapter AL072302SV 1
54 Gun ass’y w/o tip (Consumer) AL126100SV 1
55 Hose adapter AL072300AV 1
56 100 Mesh filter (3 pk.) AL126301AJ 1
57 Filter housing adapter AL072400AV 1
58 Stop nut ST073804AV 1
59 Plug ST073706AV 1
60 Block bolts MJ103910AV 4
* Shaft seal AL045503AV 1
* Motor See chart 1
Panel & decal AL162200SV 1
■
Long filter housing assembly AL139000SV 1
(Includes 48, 52 & 53)
* Not shown
OPTIONAL METAL GUN FILTERS AVAILABLE (Twin pack)
30 Mesh filter AL086103AJ
50 Mesh filter AL086100AJ
200 Mesh filter AL086102AJ
screws, do not apply too much torque.
These are self-tapping screws and will
strip out the frame if too much torque
is applied.
11. Drive the two screws provided
through the bucket hook and into
the frame with a straight screwdriv-
er or a 5/16” nut driver.
Do not attach the suction assembly
at this time.
Figure 7 - Install Bucket Hook
Replacement Parts List
Ref. Part
No. Description Number Qty.
Ref. Part
No. Description Number Qty.
www.chpower.com