background image

10

Operating Instructions

 

SB504000

www.chpower.com

Limited Warranty

1.   DURATION: From the date of purchase by the original purchaser as follows: One (1) Year. 

2.   WHO GIVES THIS WARRANTY (WARRANTOR): Campbell Hausfeld / Scott Fetzer Company, 100 Production Drive, Harrison, 

Ohio, 45030, Telephone: (800) 543-6400

3.   WHO RECEIVES THIS WARRANTY (PURCHASER): The original purchaser (other than for purposes of resale) of the Campbell 

Hausfeld product. 

4.   WHAT PRODUCTS ARE COVERED BY THIS WARRANTY: Any Campbell Hausfeld nailer, stapler, air tool, spray gun, inflator or 

air accessory supplied or manufactured by Warrantor. 

5.   WHAT IS COVERED UNDER THIS WARRANTY: Substantial defects in material and workmanship which occur within the 

duration of the warranty period. 

6.   WHAT IS NOT COVERED UNDER THIS WARRANTY:

A.  Implied warranties, including those of merchantability and FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED FROM 

THE DATE OF ORIGINAL PURCHASE AS STATED IN THE DURATION. If this product is used for commercial, industrial 
or rental purposes, the warranty will apply for ninety (90) days from the date of purchase. Some States do not allow 
limitation on how long an implied warranty lasts, so the above limitations may not apply to you.

B.  ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY 

DEFECT, FAILURE, OR MALFUNCTION OF THE CAMPBELL HAUSFELD PRODUCT. Some States do not allow the exclusion 
or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

C.  Any failure that results from an accident, purchaser’s abuse, neglect or failure to operate products in accordance with 

instructions provided in the owner’s manual(s) supplied with product. Accident, purchaser's abuse, neglect or failure 
to operate products in accordance with instructions shall also include the removal or alteration of any safety devices. 
If such safety devices are removed or altered, this warranty is void.

D.  Normal adjustments which are explained in the owner’s manual(s) provided with the product.

E.  Items or service that are normally required to maintain the product, i.e. o-rings, springs, bumpers, debris shields, driver 

blades, fuses, batteries, gaskets, packings or seals, fluid nozzles, needles, sandblast nozzles, lubricants, material hoses, 
filter elements, motor vanes, abrasives, blades, cut-off wheels, chisels, chisel retainers, cutters, collets, chucks, rivet 
jaws, screw driver bits, sanding pads, back-up pads, impact mechanism, or any other expendable part not specifically 
listed. These items will only be covered for ninety (90) days from date of original purchase. Underlined items are 
warranted for defects in material and workmanship only.

7.   RESPONSIBILITIES OF WARRANTOR UNDER THIS WARRANTY: Repair or replace, at Warrantor’s option, products or 

components which are defective, have malfunctioned and/or failed to conform within duration of the warranty period. 

8.   RESPONSIBILITIES OF PURCHASER UNDER THIS WARRANTY:

A.  Provide dated proof of purchase and maintenance records.

B.  Call Campbell Hausfeld (800) 543-6400 to obtain your warranty service options. Freight costs must be borne by the 

purchaser.

C.  Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s). 

9.   WHEN WARRANTOR WILL PERFORM REPAIR OR REPLACEMENT UNDER THIS WARRANTY: Repair or replacement will be 

scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of 
replacement parts.

This Limited Warranty applies in the United States, Canada and Mexico only and gives you specific legal rights. You may also 
have other rights which vary from state to state or country to country.

Summary of Contents for IN717702AV

































Reviews: