background image

please call 1-800-543-6400 for customer 
assistance. Have the serial number, 
model number, and parts list (with 
missing parts circled) before calling.

General Safety Information

CalIfornIa propoSItIon 65

 

This product or  

  its power cord may 

contain chemicals known to the State 
of California to cause cancer and birth 
defects or other reproductive harm. 
Wash hands after handling.
 

You can 

  create 

dust when you cut, sand, drill 
or grind materials such as 
wood, paint, metal, concrete, 
cement, or other masonry. This dust 
often contains chemicals known to 
cause cancer, birth defects, or other 
reproductive harm. Wear protective 
gear.

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. 
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or 
property damage! Retain instructions for future reference.

For parts, product & service information

visit 

www.chpower.com

REMINDER: Keep your dated proof of purchase for warranty purposes! 

Attach it to this manual or file it for safekeeping.

IN634800AV 8/10

See Warranty on page 8 for important information about commercial use of this product.

operating Instructions  

HX5100, HX5101

© 2010 Campbell Hausfeld/Scott Fetzer

oil-lubricated 

Compressors

Description

This oil-lubricated compressor is 
designed for do-it-yourselfers with a 
variety of home and automotive jobs. 
These compressors can power spray 
guns, impact wrenches and other tools. 
Compressed air from this unit will 
contain moisture. Install a water filter 
or air dryer if application requires dry 
air.

Safety Guidelines

This manual contains information 
that is very important to know and 
understand. This information is 
provided for SAFETY and to PREVENT 
EQUIPMENT PROBLEMS. To help 
recognize this information, observe the 
following symbols.

 

Danger indicates an  

  imminently 

hazardous situation which, if not 
avoided, WILL result in death or serious 
injury.
 

Warning indicates a  

  potentially 

hazardous situation which, if not 
avoided, COULD result in death or 
serious injury.
 

Caution indicates a  

  potentially 

hazardous situation which, if not 
avoided, MAY result in minor or 
moderate injury.
 

Notice indicates  

  important 

information, that if not followed, may 
cause damage to equipment.

Unpacking

After unpacking the unit, inspect 
carefully for any damage that may 
have occurred during transit. Make sure 
to tighten fittings, bolts, etc., before 
putting unit into service. In case of 
questions, damaged or missing parts, 

GEnEral InforMatIon

 

Do not operate unit 

  if damaged during 

shipping, handling or use. Damage may 
result in bursting and cause injury or 
property damage. 
 

Do not run 

  unattended. 

Leaving compressor in AUTO position 
may allow it to turn on inadvertently. 
To prevent this and possible damage 
from power surge, turn to OFF position 
after each use.

Record the Model No., Serial No. and date 
of purchase located on the base below the 
pump in the space below.
Model No. 

______________________

Serial No. 

______________________

Date of purchase   ______________________
Retain these numbers for future reference.

Do not rEtUrn tHE
proDUCt to tHE
rEtaIlEr!

STOP!

Breathable Air Warning

this compressor/pump is not 

equipped and should not be 

used “as is” to supply breathing 

quality air. for any application of 

air for human consumption, the 

air compressor/pump will need 

to be fitted with suitable in-line 

safety and alarm equipment. 

this additional equipment is 

necessary to properly filter 

and purify the air to meet 

minimal specifications for Grade 

D breathing as described in 

Compressed Gas association 

Commodity Specification G 

7.1 - 1966, oSHa 29 Cfr 1910. 

134, and/or Canadian Standards 

associations (CSa).

DISClaIMEr of WarrantIES
In the event the compressor 

is used for the purpose of 

breathing air application 

and proper in-line safety 

and alarm equipment is not 

simultaneously used, existing 

warranties shall be voided, and 

the manufacturer disclaims any 

liability whatsoever for any loss, 

personal injury or damage.

Summary of Contents for HX5100

























Reviews: