background image

3/8 inch Ratchet

Table of Contents

Description  . . . . . . . . . . . . . . . . . . . . .  1
Unpacking . . . . . . . . . . . . . . . . . . . . . .  1
Safety Guidelines  . . . . . . . . . . . . . . . .  1
Important Safety Information  . . . . . .  1
Tool Components and 
Specifications. . . . . . . . . . . . . . . . . . . .  2
Operating Instructions  . . . . . . . . . . . .  4
   Lubrication . . . . . . . . . . . . . . . . . . . .  4
   Recommended Hookup. . . . . . . . . .  4
   Operational Mode . . . . . . . . . . . . . .  5
User-Maintenance Instructions  . . . . .  5
Troubleshooting Chart . . . . . . . . . . . .  6
Warranty  . . . . . . . . . . . . . . . . . . . . . . .  8

Description

Ratchets are air tools designed for 
removing and installing spark plugs 
and different engine parts such as 
water pumps, radiators, etc. Use in 
confined areas where hand tools are 
cumbersome.

Unpacking

 After unpacking the unit, inspect 
carefully for any damage that may 
have occurred during transit. Make sure 
to tighten fittings, bolts, etc., before 
putting unit into service.

CALIFORNIA PROPOSITION 65

This product can expose you to 
chemicals including lead, which are 
known to the State of California 
to cause cancer and birth defects 
or other reproductive harm. For 
more information go to www.
P65Warnings.ca.gov. 

 
You can create dust 
when you cut, sand, drill 
or grind materials such 
as wood, paint, metal, concrete, 
cement, or other masonry. This dust 
often contains chemicals known to 
cause cancer, birth defects, or other 
reproductive harm. Wear protective 
gear.

Safety Guidelines

This manual contains information 
that is very important to know and 
understand. This information is 
provided for SAFETY and to PREVENT 
EQUIPMENT PROBLEMS. To help 
recognize this information, observe the 
following symbols.

 Danger 

indicates 

 an imminently 

hazardous situation which, if not 
avoided, WILL result in death or 
serious injury.
 Warning 

indicates 

 a potentially 

hazardous situation which, if not 
avoided, COULD result in death or 
serious injury.
 Caution 

 

indicates 

 a potentially 

hazardous situation which, if not 
avoided, MAY result in minor or 
moderate injury.
 Notice 

indicates 

 important 

information, that if not followed, 
may cause damage to equipment.

NOTE:

 Information that requires special 

attention.

Important Safety Instructions

INSTRUCTIONS PERTAINING TO A 
RISK OF FIRE, ELECTRIC SHOCK, OR 
INJURY TO PERSONS 

This manual contains safety, operational 
and maintenance information. Contact 
your Campbell Hausfeld representative 
if you have any questions.

 

When using tools, 

 basic precautions 

should always be followed, 
including the following:

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the 
product described. Protect yourself and others by observing all safety information. Failure to comply with instructions 
could result in personal injury and/or property damage! Retain instructions for future reference.

See Warranty on page 8 for important information about commercial use of this product.

Operating Instructions   

AT0510, TL0501

Locate model and date code on 
tool and record below:

Model No.: _____________________

Date Code: _____________________

Retain these numbers for

future reference.

Models AT0510 and TL0501

IN732703  1/19

REMINDER: Keep your dated proof of purchase for warranty purposes! 

Attach it to this manual or file it for safekeeping.

© 2019 Campbell Hausfeld
A Marmon/Berkshire Hathaway Company

For parts, product & service information

visit 

www.campbellhausfeld.com

Summary of Contents for AT0510

























Reviews: