ERGOPOWER WL CONTROLS - Rev. 03/ 08-2022
CAMPAGNOLO COMPONENTS - USER MANUAL
11
DRAFT
5.7 - STATE OF CHARGE AND BATTERY LIFE
Blue colour
: battery charge ok
Red colour
: replace the battery as soon as possible
The battery charge level can also be viewed by operating the levers and observing the
colour of the LED on the Ergopower controls.
Battery life under normal use is XXXX km/years
5.8 - APP MYCAMPY
Additional information and customisation features are available in the MyCampy app.
NO!
OK!
NO!
NO!
NO!
OK!
W
Fig.19
Fig.18
OK!
NO!
Fig.20
Fig.17
To view the charge level of the battery, quickly press the MODE button of the Ergopower
control (Fig.17) and look at the colour of the LED on the control itself.
6 - PERIODIC INSPECTION
Before each use and after a fall or collision, check that
the bicycle components do not exhibit any of the following
problems:
• Ergopower commands that are loose or not correctly
positioned on the handlebar (Fig. 18).
• Ergopower commands that are damaged and no longer
operating the front derailleur, rear derailleur and brakes
correctly.
• Ergopower commands, cables and sheaths that are
damaged and no longer operating the front derailleur, rear
derailleur and brakes correctly.
• Command levers that are jammed and do not return to the
original position, or levers that are damaged.
• Command covers that are broken or damaged, which could
cause the hands to slip.
• Cuts or damage to the brake system tubing
• Broken or damaged brake pads
• Excessive wear of the brake pads, where the wear indicator on one or more of the pads is no longer visible (Fig. 19).
• Incorrect position of the screw holding the pads in position
and/or missing cotter pin at the end of the screw (Fig. 20)
• Discs with excessive wear (disc thickness of less than 1.65 mm,
measured at any point on the braking surface).
If one or more of these problems are found or in the event of any
doubts with regard to the correct operation of the component,
contact a specialised mechanic as indicated in Chapter 2,
"Information and technical support".
Campagnolo spare parts must only be installed by qualified mechanics with specialised skills, tools and adequate experience,
following the installation instructions precisely. Installation by unqualified persons may cause malfunctions, accidents and serious or
even fatal injury.
WARNING!
