ERGOPOWER WL CONTROLS - Rev. 03/ 08-2022
CAMPAGNOLO COMPONENTS - USER MANUAL
13
DRAFT
7.3 - TRANSPORTATION
Fig.21
Fig.22
When transporting the bicycle, it is best not to remove the batteries for the rear derailleur and front derailleur. Therefore there is no need to turn off
the Ergopower controls. In case of vibrations, the components of the groupset will not turn on because the levers of the Ergopower controls are not
activated.
If it is necessary to remove the batteries for the rear and front derailleur, turn off the Ergopower controls (as indicated in Chapter 5.6) to avoid running
down the batteries unnecessarily.
• If you need to remove the wheels from the bike, ensure that
you have inserted the transport tool (Fig. 21/22) which prevents
the brake pads from coming together if the brake lever is
accidentally engaged, making it impossible to insert the disc.
If this occurs, consult a qualified mechanic or a Campagnolo
Pro Shop to have this issue rectified.
• The braking system can be transported by air; no
adjustments need to be made. Make sure that the brake
system tubing is protected and cannot become bent.
• After transportation:
- Check that there are no oil leaks.
- Check that no component of the bicycle is damaged, particularly the cables and hoses that form part of the braking system.
- Engage the brake lever 4-5 tines in a safe place to ensure that the front and rear brake systems are working properly.
7.4 - STORAGE
If the bicycle is not used for a long time, it is best to turn off the Ergopower controls as indicated in Chapter 5.6 and remove the batteries as indicated in
Chapter 5.5
Do not expose the product to temperatures below -10 ° C (5 ° F) or above 60 ° C (131 ° F). For this reason, do not leave these components in locked cars
parked in the sun and do not store them near radiators or other heat sources. Do not store carbon or plastic products in direct sunlight.
8 - PERIODIC MAINTENANCE AND SAFETY INSTRUCTIONS
For all information and requirements relating to the product, the instructions provided in the sections "3 - SAFETY RECOMMENDATIONS", "4 - BEFORE
USING THE BICYCLE" and "6 - PERIODIC INSPECTION" must be followed.
Campagnolo recommends that you take your bike to a Campagnolo Pro-Shop or mechanic specialised in assembling Campagnolo® components at least
once a year, to check that the brake system and all other parts of the bicycle are working correctly. However, depending on how the bicycle is used, more
frequent inspections may be necessary.
Ask your mechanic to help you choose the best maintenance programme for you.
A mechanical expert may be better trained and qualified to check the function of the system than even the most experienced of users.
SAVE THESE INSTRUCTIONS
