!
" # $
%
$ &' (') !&
Pag.31
MAINTENANCE
6.3 Periodic maintenance schedule
The following maintenance operations
have to be carried out only in case of
tool proper functioning. If the task is
very hard, the operations shall be
carried out more frequently.
Before
any use
After a
working
day
After a
working
week
After every
oil refilling
of the air
compressor
lubricator
If the tool is
damaged or
faulty
At the end of
the working
season
Tool storing
time
Complete tool
Check losses,
cracks and wear
and tear
X
X
Handle
drive
lever
Check for proper
functioning.
X
X
Compressor
lubricator
glass
Check losses,
cracks, wear and
tear
X
X
X
X
Chain lubrication
Check for proper
functioning
X
Chain
Check damages,
wear and tear,
sharpening
X
X
X
Check its tension
X
X
Check the depth
marker
X
X
Bar
Check its wear and
tear
X
X
All the screws and
nuts which can be
reached
Check and tighten if
necessary
X
X
7. DISMANTLING THE MACHINE WHEN NO LONGER USED
7.1 Disposal of exhaust materials
After having been installed and while working, the machine does not cause any environment pollution. In any
case, all through its working life, some types of replaced or exhaust materials (such as filters, oil, etc.) are being
produced in certain situations.
There are specific regulations in every Country as for the disposal of these materials and the environment
protection.
The Customer is compelled to be knowledgeable in the Laws in force in his own Country and to operate only
while complying with these regulations, according to the indications in the product technical charts, which may
be obtained from the Manufacturer.
