! "
# $
" %& '&(
%
Pag.15
MANUTENZIONE
6.2.3
Affilatura della catena
ATTENZIONE
•
Indossare guanti anti perforazione.
•
Seguire le istruzioni del produttore per l’affilatura e la manutenzione della catena (5). Diminuendo
l’altezza del delimitatore di profondità si può aumentare il rischio di contraccolpi.
•
Ogni 3 o 4 affilature della catena, controllare ed eventualmente limare il delimitatore di profondità,
servendosi di una lima piatta, dopodiché arrotondare la punta anteriore.
•
Il passo della catena è ¼”, quindi usare una lima di diametro 4 mm e una lima piatta.
•
Affilare sempre la catena dall’interno verso l’esterno del tagliente, con un’inclinazione di 35°.
•
Le maglie taglienti, dopo l’affilatura, devono essere tutte della stessa lunghezza e larghezza.
Limare nella direzione indicata
Impugnatura 10°
Usare la lima mantenendo
uno spazio pari a 1/5 del
diametro della lima stessa
Disporre il calibro di profondità in modo saldo sulla catena di guida, in modo tale che il delimitatore di
profondità fuoriesca.
Limare la parte protuberante del delimitatore di profondità fino a quando si ottiene il medesimo livello come il
calibro di profondità.
Arrotondare l’angolo anteriore del delimitatore di profondità.
Angolo superiore
Angolo laterale
Angolo di taglio sulla
Calibro di profondità
della piastrina
della piastrina
parte superiore della
piastrina