14
9. Transport
WARNING: Danger of crushing!
Stoves and their accessory parts are very heavy. There is
danger of injury when carrying heavy loads and/or due
to improper securing during transport!
Lift and carry the components with a sufficient number
of people. If necessary, remove the individual
components, e.g. refractory, and transport them
separately. Use suitable means of transport, e.g. a
hand truck with a lashing strap or a lift truck. Secure all
components against tipping and falling when
transporting and storing.
9.1 Delivery
Standard delivery is generally carried out on several
pallets. Please report transport damage to your supplier
immediately!
9.2 Transport weight
The weight and dimensions of the standard delivery vary
depending on the equipment variant. See the freight
papers for these data.
The following approx. transport weights apply for the
masonry stove and the fire clay container:
Masonry stove
Ronda
GO
4557
heat storage
system S21
Basic body
240
Refractory rotary chimney (6 rings)
180
Parts of heat storage system
440
All weights are approximate - specified in kg!
9.3 Transport to and at installation site
Secure the transported materials against tipping and
falling. Make sure that the means of transport, the
transport routes and the number of persons available
are suitable for danger-free transport.
10. Fuels
Fig.: 8 Example of permissible/impermissible fuels
Permissible fuels
Impermissible fuels (examples)
Waste
Pallets
Logs:
(natural wood, air-dried,
max. moisture content 20 %,
Fig. with rule of thumb for
max. ø)
Pressed wooden pellets,
wood briquette
(made of natural wood,
according to DIN 51731)
Wood chips,
wood pellets
10.1 Permissible fuels
10.1.1 Logs
i
The 1st. German Federal Emission Protection
Ordinance (Bundes-Immissionsschutzverordnung)
only requires a residual moisture of under 25%
for logs, based on the dry weight of the fuel. We
stipulate a maximum residual moisture of 20%
for our fireplace cassettes!
i
Combustion of impermissible fuels applies, for
example in Germany, as a violation of the 1st
German Federal Emission Protection Ordinance
(Bundes-Immissionsschutzverordnung).
Only use untreated, air-dried, well-seasoned, split
logs with a residual moisture content of less than 20%
(if correctly dried, this can be achieved after approx.
2 – 3 years).