background image

Heat storage-stone fi replaces

The storage stone from Camina is a rein-

forced casting compound that still stores 

and gently gives off  the radiated heat of 

the fi replace for many hours after com-

bustion. 

The systems are easy to install and can 

be removed again quickly when moving 

or in case of a desired design change. 

Camina exclusively uses Schmid fi ring 

technology as the „motor“ of the systems 

– on request also with water systems.

– some models are on request also with 

water heating.

Modern natural stone fi replaces

Natural stone is a product grown in the 

natural world over millions of years, to 

which we can ‚only‘ add the shape and 

the fi nal touches. 

Slight deviations in the colour, structure 

and pattern are therefore perfectly nor-

mal. Every system produced from it is 

truly unique, which accounts for the high 

value of this product. 

Classic natural stone fi replaces

Camina off ers a broad range of surrounds 

for your fi replace. For example, also a 

uniquely diverse line of natural stone 

facades – with both classic and modern 

designs. 

Natural stone is, as the name already 

denotes, a product grown in the natural 

world over millions of years, to which we 

can ‚only‘ add the shape and the fi nal tou-

ches. 

Natural stone systems are rightly consi-

dered to be especially valuable. After all, 

a great deal of craftsmanship is required 

to produce them. Each system is truly 

unique!

Camina 11/ 2017 

Camina 11/2018

Camina 0

7/2019

Summary of Contents for GO-Line S21

















































Reviews: