Camille Bauer SIRAX TV 808-62, Operating Instructions Manual

Page: 19 / 20

19
10.2 Standard output ranges
Soldered jumpers are provided for the coarse setting of the
output ranges and the fine adjustment is accomplished using
the potentiometers “Zero” and “Span”.
Current
[mA]
Soldered jumpers
Voltage
[V]
Soldered jumpers
Channel
1
Channel
2
Channel
1
Channel
2
0 … 20 B120 B220 0 … 10
B120
B122
B123 B220
B222
B223
4 … 20 B121 B221 2 … 10
B121
B122
B123 B221
B222
B223
± 20 ––– ––– ± 10
B122
B123 B222
B223
10.3 Specific user output ranges
Units that have been configured for a specific user output
range cannot be subsequently reconfigured.
B21
2
B21
3
B21
4
B21
5
B21
6
B21
7
B207 B208 B209 B210 B211
B201 B202 B203 B204 B205
B221 B220
B122
B123
B113 B114 B115 B116 B117
B107 B108 B109 B110 B111
B101 B102 B103 B104 B105
B206
B106
Span 1
Zero 1
Span 2
Zero 2
B121 B120
B223 B222
B112
Fig. 6. Position of the soldered jumpers B…, potentiometers
“Zero” and “Span”.
11. Mounting
The isolating amplifier SIRAX TV 808 is plugged onto a
backplane BP 902.
When deciding where to install the transmitter
(measuring location), take care that the
limits of
the operating temperature are kept:
– 25 and + 40 °C for standard instruments!
11.1 Plugging the module into the backplane
Before inserting the SIRAX TV 808 into the
backplane, ensure that, …
… the backplane wiring is in strict accordance
with the wiring diagram of the module
… the backplane is coded correctly ac-
cording to the section entitled “Mecha-
nical coding of the backplane”. Read the
instructions for the back-plane.
… The red coding insert has been remo-
ved from the backplane for SIRAX plug-in
modules with a power supply of 24…60 V
DC/AC and that the power supply is correct
for the module.
1. Clip the module base onto the top-hat rail.
2. If the backplane is mounted vertically, turn the quick release
screws on the module to a vertical position, respectively if
it is mounted horizontally, turn the screws to a horizontal
position.
3. Press the quick release screws inwards with the screw-
driver until there is an audible click.
SIRAX
3.
GOSSEN METRA
WA
TT
C
AM
ILLE BAUER
SIRAX
1.
2.
Fig. 7. Plug the module into the base.
12. Commissioning
Switch on the measuring inputs and the power supply. The
green LED lights continuously after switching on.
The power supply unit must be capable of supp-
lying a brief current surge when switching on. The
isolating amplifier presents a low impedance at
the instant of switching which requires a current
I
start
of …
… I
start
≥
160 mA for the version with a power supply
range of 24 – 60 V DC/AC
or
… I
start
≥
35 mA for the version with a power supply
range of 85 – 230 V DC/AC