PM 1000268 000 00
Device handbook SIRAX MM1200
27/48
The brightness & contrast of the TFT LCD screen can be varied by the user by sliding the sliders.
Touching the “
OK
key” will OK confi rm the current brightness contrast setting.
Touching the DEFAULT key will set brightness and contrast as per factory settings. Touching the BACK
key will move back to the setup menu without making any changes.
The allowable range is from 1 to 10 sec.
If value outside this range is entered, It will display “INVALID VALUE” followed by correct range of
parameter.
LINE-NEUTRAL VOLTAGE
VOLTAGE
MAIN
VL2
VL2
VL2
VL2
V
V
V
V
V
0.000
0.000
LINE-NEUTRAL VOLTAGE
VOLTAGE
MAIN
VL2
VL2
VL2
VL2
V
V
V
V
V
0.000
0.000
VOLTAGE
MAIN
BRIGHTNESS & CONTRAST
BACK
DEFAULT
OK
DEFAULT
CONTRAST
BRIGHTNESS
LINE-NEUTRAL VOLTAGE
LINE-NEUTRAL VOLTAGE
LINE-NEUTRAL VOLTAGE
VALID RANGE IS : 1 - 10 Secs
RELAY-1 DE-ENERGIZING DELAY
1
2
3
4
5
6
7
8
9
0
BACK
DEL
ENTER
7.2.4.2 Parameter setting for Analog Output 1 (Optional)
This option allows the user to set analog output 1 to corresponding measured parameter. A simple touch on “ANALOG-1”row will open screen
having list of parameters.(Refer table2 “ Parameter for Analog & Limit output ”) Touch on “
OK
key” will confi rm the setting.
Touching the “
BACK
key” will keep the old selected setting and will return to previous menu.
7.2.4.3 Parameter setting for Analog Output 2 (Optional)
This option allows the user to set analog output 2 to corresponding measured parameter. A simple touch on “ANALOG-2”row will open screen
having list of parameters.( Refer table2 “ Parameter for Analog & Limit output ”)
Touch on “
OK
key” will confi rm the setting.
Touching the “
BACK
key” will keep the old selected setting and will return to previous menu.
7.2.5 Brightness & Contrast
