Cameron Scanner 3100, Networking Manual

Page: 34 / 37

30
Section 5 Scanner 3100 Wi-Fi & Advanced Networking Guide
LAN Network Configuration options
The Scanner 3100 LAN network configuration has now been discovered and will be set to one of the following
options: disabled , LAN Client (DHCP), LAN Client (Stat), or LAN Server.
The table below in Figure 61
, describes the three LAN network configuration options available to the Scanner
3100:
LAN Network
Configuration
Description of Network Configuration
LAN Client (DHCP)
LAN DHCP Client Enabled
The Scanner 3100 is a LAN client with a dynamically assigned address. The Scanner
3100 must be connected to a managed network and the network’s DHCP will grant it
an address
User Ethernet enabled devices must connect to the same managed network to reach
the Scanner 3100.
LAN Client (Stat)
LAN Static Client Enabled
The Scanner 3100 is a LAN client with a statically assigned address. When the Scan
-
ner 3100 connects to a managed network, the scanner will use its configured Static IP
address.
User Ethernet enabled devices must connect to the same managed network to reach
the Scanner 3100.
LAN Server
LAN DHCP Server Enabled
The Scanner 3100 is a LAN DHCP server that will assign IP addresses to connecting
devices.
User Ethernet enabled devices can connect directly to the Scanner 3100.
Figure 61 - LAN network configuration options
Connect to a LAN Client (DHCP)
Figure 62
shows the configuration window on a Scanner 3100 which has been configured as a LAN Client
(DHCP).
1.
Configure your personal Ethernet enabled device as a DHCP
client for a dynamic IP address assignment.
2. Connect your personal Ethernet enabled device to the same
network the Scanner 3100 is connected to. The SSID and
password of that network will have to be provided to you by the
network administrator.
3. Allow time for your personal Ethernet enabled device to con-
nect. The network DHCP server will grant your personal Ether
-
net enabled device an IP address.
4. Enter the Scanner 3100 address found on the window into the
address line of a web browser. The Scanner 3100 IP address
will be listed on the window after the
LAN Client (DHCP)
label. As shown in the example on Figure
62
, the Scanner 3100 LAN Client (DHCP) IP address is
192.168.000.064
.
Figure 62 - LAN Client (DHCP)