Cameron Scanner 3100, Networking Manual

Page: 22 / 37

18
Section 3 Scanner 3100 Wi-Fi & Advanced Networking Guide
a.
Enter a Host Name into the Host Name field.
b.
Enter an IP Address into the IP Address field.
c.
Enter a Default Gateway into the Default Gateway field.
d.
Enter a Subnet Mask into the Subnet Mask field.
e.
Enter a Primary DNS Server into the Primary DNS Server field.
f.
Enter a Secondary DNS Server into the Secondary DNS Server field.
This section will only appear when Static IP Parameters is selected as the Client Address Type from Wireless
Client Configuration section.
8. Click the Save button to accept the changes. The system will write the changes and reset the wireless
configuration settings. All networks will be shut down and restarted after 90 seconds.
7.
Under the ‘Static IP Configuration – Wireless Client’ heading as shown in
Figure 37
;
Figure 37 - IP Configuration - Access Point section on the Modify Wi-Fi Configuration screen