Cameron Scanner 3100, Networking Manual

Page: 13 / 37

9
Scanner 3100 Wi-Fi & Advanced Networking Guide Section 2
d.
The Scanner 3100 will restart the network configurations. A
Restarting Network
message will
appear on the device and the restart will take 90 seconds.
2.
To confirm if the Scanner 3100 is connected as a LAN Serv
-
er, cover the left side of the Scanner 3100 LCD and after 3
seconds a window will appear as shown in
Figure 13 . The
lower section of the window will show the
LAN Server
.
Figure 13 -
LAN Server
3.
Plug in the Scanner 3100 directly into the device (laptop) with an Ethernet cable.
4.
On the Scanner 3100 faceplate, top left corner of LCD:
a. A
Not Connected
or
Link Searching
message
may appear while the Scanner is negotiating the IP
address.
b.
The IP address appears (see
Figure 14
).
Figure 14 - IP Address
5.
Open any Web Browser (e.g. Chrome, Internet Explorer, Safari, etc.):
a. Type the IP address from the top left hand corner of the Scanner 3100 LCD into the browser’s ad-
dress bar, as shown in Figure 15 .
Figure 15 - Web browser entry of IP Address