26
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
LED Fre-
quency
= LED PWM frequency 800Hz /
1200Hz /
2000Hz /
3600Hz /
12kHz /
25kHz
Configuration of LED PWM frequency
IR Remote
= Activate or deacti-
vate control by IR
remote control
On
IR remote control activated
Off
IR remote control deactivated
Factory
Reset
= Reset to factory
settings
Reset
Now!
Reset to factory settings:
Confirm with ENTER. Cancel with MODE
BATTERY RUN TIME (Runtime)
Battery life can be increased to up to 24 hours by reducing brightness accordingly (see table
Settings). Battery life is calculated with spotlight on full and 100% battery charge status. Battery
life is extended considerably if not all of the colours red, green, blue and white are activated (Full
On), instead only red, for example.
Dimmer curves
linear
DMX value
Light intensity
exponential
DMX value
Light intensity
logarithmic
DMX value
Light intensity
S-curve
DMX value
Light intensity
SYSTEM INFORMATION (System Info)
Press MODE to access the selection menu. Using the UP and DOWN controls, select the menu
item „System Info“ (observe arrow) and confirm with ENTER.
---------------- Menu ----------------
DMX Address
DMX mode
Stand Alone
Slave
Settings
System Info
Use the UP and DOWN controls to select the desired submenu item, and press ENTER to display
the corresponding information.
Summary of Contents for Zenit B200
Page 223: ......