17
DMX
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
SYSTEM SETTINGS (Settings)
Ausgehend von der Hauptanzeige gelangen Sie durch Drücken auf den Encoder in das Hauptmenü.
Select the
Settings
menu item and confirm the selection.
This will take you to the submenu for setting the submenu items. See table (rotate the encoder to
select and push the encoder to confirm selection, change value or status by rotating, confirm by
pressing encoder.
Settings
Display
Reverse
= Rotate display
OFF
No display rotation
ON
Display is rotated by 180° (e.g. for over-
head installation)
Display Off
Timer
= Display lighting
Off after
20s
Deactivates after approximately 20
seconds of inactivity
Always
On
On permanently
DMX fail
= Operational status
with DMX signal
fault
Hold
Last command is retained
or
blackout,
Activates blackout
Full
Full On = maximum brightness
Standa-
lone
Stand Alone Mode Direct is activated
Dimmer
curve
= Dimmer curve
Linear
Light intensity increases linearly with
DMX value
Exponen-
tial
Light intensity can be finely adjusted at
lower DMX values and broadly adjusted
at higher DMX values
Logarith-
mic
Light intensity can be broadly adjusted at
lower DMX values and finely adjusted at
higher DMX values
S-curve
Light intensity can be finely adjusted at
lower and higher DMX values and broad-
ly adjusted at medium DMX values
